FACTORY CONDITION RESTORATION

VCM REBUILD SERVICE

Product was successfully added to your shopping cart.

We preform equipment rebuilds on a daily basis with our full service fabrication and equipment refurbishment department . We rebuild all Berkel, Stephan and Hobart Vertical Cutter/Mixers (VCM) 25, 40 and 44 models. We have turned the worst of machines into brand new, factory condition. We offer affordable freight options and handle all the pick ups and deliveries for you. Our expertly trained technicians carefully inspect every working aspect of the rebuild to ensure it leaves our facility ready for years of production.

Our rebuild service also extends to other restaurant equipment.

STANDARD VCM REBUILD

PRICING

The cost for our standard rebuild starts at $950 per mixer plus freight both ways.

TIME FRAME

Our rebuild typically takes 2-4 weeks to complete and can depend on cosmetic options.

OPTIONS

Powder Coated Frame: +$650
Polished Lid: +$200
Stator Rewind: +$825

SCOPE OF WORK

Our standard rebuild consists of a thorough cleaning of the mixer and the removal of the rotor for bearing replacement. We replace both upper and lower bearings with high quality, double sealed, grease packed ball bearings. All electronics, motors and safety mechanisms are checked for 100% functionality. We finish the job with the installation of new a bowl seal and shaft sleeve.

GETTING STARTED

Just give us a call at 800-651-9271 and provide us with your address. There are no up-front costs to get your rebuild started! Our only request is that you strap the mixer to a pallet prior to the scheduled pickup. Before the truck arrives at your location we will e-mail you the paperwork for the shipment. Once the mixers arrive to our shop we'll contact you with our initial equipment review.

Other Repair Services

VCM 44 ATTACHMENT SHAFT REPAIR

A common problem with the VCM 44 is damage to the attachment shaft caused from blade hop. With our full service machine shop, we are able to repair damaged top motor shaft without having to replace the entire rotor. The cost to repair the attachment shaft is $450 plus return shipping. In most cases we can offer a 2 day turn around time. Contact us today to schedule this repair ahead of time to guarantee a fast turn around time. 800-651-9271.

STATOR REWIND

Due to the high cost of replacing a specialized motor, most of customers take advantage of our stator rewind service. This service is priced at $849.95 + return shipping.

BLADE SHARPENING

We offer a blade sharpening service with a fast turn around time. This service costs $25 a blade plus return shipping. If you're interested in this service simply send you blades to our location with your contact information in the box. Once the sharpening is complete we will contact you for payment and ship them back. It's that easy!

Schedule your Rebuild Today! 800-651-9271

Send us a message